What is a guillotine machine
A guillotine machine is a kind of grass cutting machine. Most of them are roughage, suitable for cattle, sheep and other livestock farmers.
The difference between the wire rolling machine and the guillotine machine
The material from the guillotine machine is section by section, and the length of the section can be adjusted. The material coming out of the kneading machine is filamentous fiber. The main reason for the different discharge is the difference in the working principle. The turning of the guillotine knife and the feeding port are vertical, so the material is mainly cut off. The turning of the knife and the feeding port of the wire kneading machine are parallel, so the material Going in is not simply cutting the material directly, but cutting the blade to make it filamentous.
The working principle of the lawn mower
The motor is used as the supporting power. The power is transmitted to the main shaft, and the gear at the other end of the main shaft transmits the speed-regulated power to the pressing grass kun through the gearbox, universal joint, etc. When the material to be processed enters between the upper and lower pressing grass Kun, it is clamped by the pressing grass Kun. It is held and sent to the guillotine cutting mechanism at a certain speed. After being chopped by a high-speed rotating knife, it is thrown out of the machine through the grass outlet. The other is the trailer type, which is towed on a tractor, and is powered by a diesel engine.
What should I do if the guillotine does not feed the grass
The guillotine does not feed the grass, it should be the weeding wheel is broken, go to the repair shop to repair it , or change the weeding wheel.
Common Troubleshooting Points of the guillotine machine
If the forage grass is blocked between the upper and lower feeding rollers of the guillotine machine during use, the main reason for the failure is It is because the feeding amount is too large, which causes grass to jam and wrap between the lower feeding roller and the bridge. The elimination method is: after parking, reverse the large pulley of the main shaft by hand, and the blocked grass can be poured out, and then remove the forage plugged and entangled by the feeding roller; The main reasons for the failure are: the gap between the moving and fixed blades is large; or the cutting edge of the moving and fixed blades is not sharp. When troubleshooting, the cutting gap can be adjusted to make the gap smaller, and the blade can be sharpened to keep the blade sharp. .
Maintenance points of the lawn mower
1. Always check whether the fasteners are loose and tighten them.
2. Strengthen the maintenance of bearing seat, coupling and transmission box, and regularly add or replace lubricating oil and grease.
3. For the price of the guillotine with adjustable cutting gap, the cutting gap should be adjusted reasonably according to the thickness of the crop stalk to ensure the normal operation of the guillotine.
4. When it is found that the blade edge is blunt, use a whetstone to sharpen the movable blade.
5. After each shift is completed, the dust and dirt on the machine should be removed in time; after the end of each season, the sundries in the machine should be removed, and the working parts should be coated with anti-rust oil and placed indoors. Ventilated and dry place.
