What should I do with raw rice? Share how to use rice cookers to cook rice
Rice cookers are the first small kitchen appliances to enter Chinese families. From the initial rice cooker to the Today’s rice cookers, from a single function of steaming rice to a multi-functional one, have indeed brought a lot of convenience to consumers, but the machine is always a machine, and some consumers will encounter various problems when using it, such as rice jam , then how should we pay attention to these problems in the process of using it?
How can I cook rice that is not hard under the rice cooker?
The only way to cook rice with a rice cooker is to control the cooking time. After plugging in the power supply, it usually takes 35 minutes to 40 minutes. (Note: After the rice is washed, it is best to leave it for about half an hour, and then heat the water. The rice produced by doing this is softer. It is especially suitable for the stomach and the elderly. .)
Power and power consumption while keeping warm?
For example, a rice cooker keeps 8 scales of water continuously for 9 hours, the average power consumption per hour is 0.056kwh, and the average hourly power is 56w.
Why does the rice cooker burn out after the water is finished?
It is because the quality of the rice cooker is too poor. Even if the temperature of the regular rice cooker is too high after the water is boiled, the magnetic safety switch at the bottom of the pot will cut off the main circuit and switch to The auxiliary circuit works, only low temperature is generated, and there is no high temperature, which will not burn the pot. In addition, it may be that your pot is too old and has exceeded its life span, which is caused by the failure of the magnetic safety switch. Any electrical appliance has a lifespan.
A little knowledge of rice cookers
1. There should be someone guarding when cooking rice and stewing meat to prevent soup and water from spilling into the electrical appliance and damaging electrical components
p>
2. Handle with care, do not bump the rice cooker frequently. Because the inner pot of the rice cooker is prone to deformation after being touched, the bottom of the inner pot cannot fit well with the electric hot plate after the inner pot is deformed, resulting in uneven heating during cooking, and easy to cook unripe rice
3. When using the rice cooker, pay attention to There must be good contact between the bottom of the pot and the heating plate, and the inner pot can be turned left and right several times
4. After the rice is cooked, the key switch will automatically bounce. Stew for about 10 minutes to make the rice cooked.
5. During the cleaning process, do not let the electrical parts come into contact with water to prevent short circuit and leakage
6. Before cleaning the inner pot , you can soak the inner tank in water for a while, do not use a hard brush to brush the inner tank. After cleaning, use a cloth to wipe clean, and the bottom can not be put into the shell with water. The outer casing and heating plate should not be soaked in water. Only wipe it with a damp cloth after cutting off the power.
7. After using the rice cooker, immediately unplug the power plug, otherwise, the automatic heat preservation will still work, which is a waste of time. It is also easy to burn the components.
8. It is not suitable to cook acid and alkaline food, and do not place it in a place with corrosive gas or humidity
9. When using, it should be Put the cooked food into the pot first, cover the lid, and then plug in the power plug. Unplug the power plug before removing food for safety
