What should I do if the bluetooth headset gets into water
1. First prepare a desiccant and a paper towel, and use the paper towel to dry the water on the surface of the bluetooth headset.
2. Check whether the headset is still working. If it is still working, shut down the headset as soon as possible. If the headset does not work, do not try to turn it on.
3. After confirming that the earphone is powered off, you can shake the earphone vigorously, and try to throw the water from the earphone out of the earphone, and do not leave a lot of water in the earphone.
4. Then put the desiccant and the Bluetooth headset together. In order to make the desiccant work better, it is recommended to put the desiccant and the Bluetooth headset on a transparent in a plastic box to avoid direct absorption of water vapor in the environment by the desiccant.
5. After standing for 24 hours, take out the bluetooth headset, press the headset power button, you can see the white light of the headset flashes, and it can work normally.
6. If your Bluetooth headset gets into water, it must be handled carefully, and you must remember to dry it before charging.
Bluetooth headset water solution
1. Hair dryer method
This method can be said to be the most direct and violent, because The size of the Bluetooth headset is small. Of course, if the water inflow is serious, use a hair dryer to blow directly on the machine. Usually, it can be repaired after a period of time, but the temperature needs to be controlled.
2. Placement method
After draining the water of the earphones, put the earphones in a vacuum bag and put them in the rice jar, so that it can be placed for a few days. But if there is a lot of water in the earphone and it has affected the chip, even putting it in the rice tank will not help, but you can try this method first, and sometimes it can have a repairing effect.
3. Maintenance method
This method will lose the risk of warranty. It is recommended that users use it after the warranty has passed, and directly disassemble it and dry it with hot air. Loss of components.
