[Ceiling fan light installation] Ceiling fan light installation height selection of ceiling fan light installation position
Ceiling fan light installation height
1. The distance between the top of the house and the ground is greater than or equal to 2.9M, which is more suitable for installing ceiling fan lights.
2. After installing the ceiling fan lamp, the minimum distance between the blade and the ground should not be less than 2.1M, which is too low to feel depressed and unsafe.
3. If the roof is lower than 2.6 meters and you want to install ceiling fan lights, it is recommended to install ceiling fan lights.
4. If the house is too high to install ceiling fan lights, the effect should also be considered. For example, if the height of the house exceeds 3 meters, it is recommended to install the ceiling fan lights with extended suspension rods, so as to ensure sufficient air volume.
5. Generally, the length of the ceiling fan lamp has a variety of specifications, such as 10cm, 25cm, 35cm, 50cm, 75cm, 100cm, or longer. You can first consider the reserved height when the house is suspended (such as Trapezoidal ceiling with high middle and low sides).
6. The formula for standard selection of ceiling fan lights: lengthening the suspension rod is equal to = room height – 2.8M.
Ceiling fan light installation location selection
1. Ceiling fan installation method
1. Turn off the power, It’s safer to turn off the power in your home before you start installing a ceiling fan.
2. Generally, the installation position of the ceiling fan is the center point of the house. Two diagonal lines can be drawn on the roof of the living room, and the intersection part is the center point of the house. Then fix the side of the new junction box of the ceiling fan directly at the keel closest to the center point (if there is a ceiling) (note here that the ceiling fan should not block the lamps, if there are lamps, the installation position of the ceiling fans can be shifted).
Second, install the junction box
A) supply power to the ceiling fan and light (if applicable) at the same time, using a switch to control the switch; B) supply the ceiling fan And/or lights are powered at the same time, and the switch is controlled with the included ceiling fan accessory or a separately purchased RF remote.
Third, connect the power cord to the ceiling fan
If you use #14-2 or #12-2 wire, follow the standard color coding scheme to wire the wires Connect to Ceiling Fan: White wire to ceiling fan’s white wire, bare (or green) wire to ceiling fan ground/green wire, black wire to ceiling fan black wire and blue wire (if available).
4. Assemble the ceiling fan
Assemble the blade and bracket components together, and then connect the combination of blade and bracket to the motor one by one. Don’t do personal work, it will be much faster.
V. Install the ceiling fan
1. Install the hanger bracket on the box with screws and lock washers, and then fix the assembled ceiling fan with screws to the mounting ring and cover onto the fan motor housing. If you have high ceilings, you may need to add a length of hanger pipe.
2. Then connect the power supply and connect the power cord to the control switch.
Again, the installation of wiring is more difficult, and the wiring cannot be wrong. Once there is a mistake, it may cause a serious short circuit and there may be a fire hazard. The master will also take orders similar to the installation of ceiling fan lights, so ceiling fans can also ask the lighting master for help. For more home information, please continue to pay attention to Master Wan, the home after-sales service.
