What is a wall washer
Wall washer, as the name suggests, allows the light to wash the wall like water, and is mainly used for architectural decorative lighting. It is also used to outline the outline of large buildings. Because LED has the characteristics of energy saving, high luminous efficiency, rich color and long life, the wall washer of other light sources is gradually replaced by LED wall washer. The technical parameters of LED wall washer Similar to LED floodlights.
Manufacturing steps of wall washer
1. First of all, on the intact aluminum substrate Apply a little thermal glue on it to assist the wall washer to dissipate heat from the radiator, and then solder the lamp beads one by one.
2. Install the shell of the wall washer on the board of the soldered lamp beads, and seal the two grooves next to it. It is convenient to pour glue without leaking out
3. What needs to be poured is to carefully pour some easy-to-dry silica gel (white glue or black glue) into the wall washer slot, and glue can also be poured To achieve the effect of waterproof and heat dissipation
4. After these silica gels are dry, carefully check whether the lamp beads are covered by these glues, and if any, clean them up.
5. Cover the panel glass of the wall washer, and then install the head. This is how the wall washer is made. (Before putting on the group head, these lines must be connected in the group head)
6. The last link is aging packaging.
How to install the wall washer
1. Do the pre-installation work according to the location of the power supply;
2. Fix the light fixture firmly with screws;
3. Connect the light fixture to the power cord firmly, and wrap the unused wire ends with waterproof tape;
4. One branch power supply is the most when installing and wiring Connect 8-10 wall washers in series; or connect another power cord after 50 meters.
5. After the installation is completed, please check the installation circuit first to confirm that the installation is correct, and after there is no electrical short circuit, connect the corresponding control power supply;
6. If there is a problem during installation If you have any questions, please consult our technical staff. Or log in directly to Mingjian Lighting’s website
