[Digital set-top box remote control settings] How to set the digital set-top box remote control to set the TV set-top box remote control method
Almost every digital TV set-top box will wear a learning remote control, After a simple setting of the remote control of the set-top box, the remote control code value of the TV can be learned, and the remote control of the TV and the set-top box can be combined into one. However, many new users do not know how to set the remote control of the set-top box. Therefore, the editor specially organized the relevant information to explain the specific operation of the remote control of the set-top box, that is, the learning of the remote control of the set-top box.
Set-top box remote control setting method
1. Press and hold the “setting” button of the set-top box remote control for 2 seconds, The LED light changes from dark to bright and enters the learning state;
2. Press the key to be learned on the remote control of the set-top box, the LED light flashes, and it is in the learning receiving state.
3. Connect the set-top box Align the transmitters of the remote control and the TV remote control with a distance of about 3 to 10cm in a straight line, press the TV remote control button and hold it for about 1 second to release;
4. After the learning is successful, the LED light of the remote control of the set-top box flashes three times and then continues to be on, and you can select other learning buttons to learn again;
5. To learn other keys, Repeat steps 2-4 for several times;
6. After learning, press the “Settings” button on the remote control of the set-top box to save and exit the learning state, and the LED light goes out.
Set-top box remote control learning settingsNotes
The two remote controls must be stable and not shake when the set-top box remote control is learning;
When the set-top box remote control is learning, the transmitters of the two remote controls must be in the same line
If you do not select a key within 14 seconds after the set-top box remote control learning function is turned on, it will automatically exit the learning state, and if you do not start learning within 14 seconds after selecting a key Automatically exit the learning state;
Pressing the setting key will exit the learning function when the set-top box remote control is in the state of learning the selection key and waiting for a signal to be received.
