Pendant lamp installation steps
1. Material preparation
We need to prepare materials before installing the chandelier, such as Wood strips, plates, hardware accessories, screws, hammers and other tools are indispensable. Only when these tools are prepared can the work be carried out smoothly.
2. Determine the installation position of the chandelier
Taking the living room as an example, the chandelier is generally installed in the middle of the ceiling, which will make the light distribution more uniform. And the overall effect will be better.
3. Drilling construction
When installing chandeliers, the first thing to look at is the size of the screw holes of the chandeliers. After the size is selected, the drill bit of the corresponding size is selected and the hole is drilled on the roof where the chandelier is to be installed. It is best to use the hole on the chandelier suction cup to make a mark when drilling. This way there will be no deviation when punching holes. Then bury the hardware accessories or wooden strips inside, fill the nearby holes with adhesive or grout, and wait for it to dry before construction.
4. Fixing accessories
After drilling the holes, it is time to install expansion screws. If the expansion screws do not fit well, wrap some hemp on them, and then use Hammer to fix the expansion screw to the roof. Once it’s fixed, it’s time to fix the siding. Choose a good direction when the hanging board is fixed.
5. Fixing the suction cup
The suction cup is relatively simple to fix, just use the screw to link the suction cup and the hanging plate together.
6. Threading the chandelier
Connect the wire to the wick through the boom. If the chandelier has a switch, you need to pay attention to the direction of the line when threading . There are still differences in the connection methods of different chandeliers. Some are fixed with screws, and some have their own buckles, which can be directly buckled on it, so that the chandelier is installed.
7. Finishing
The lampshade and lamp arm of the chandelier can be installed with tools such as screwdrivers and hammers. After installation, it can be powered on Try it out and fine-tune it according to the actual situation.
The height of the chandeliers
Generally speaking, the height of the chandeliers in the living room depends on the actual situation. Generally speaking, the lower part of the chandelier is away from the ground. 2.2m-2.5m is the most suitable, but sometimes, if the central air conditioner is installed in the home and the ceiling is thicker, then when making chandeliers, the height of 2m-2.4m from the ground is also acceptable, as long as you walk from below It is enough that you don’t touch the head when you are installing it, but you should try to install it as high as possible. If it is too low, it will look very depressing.
Precautions for installation of chandeliers
1. Note that the chandeliers cannot be installed too low
Install the chandeliers too low The floor height of the house has certain requirements. No matter it is the living room or the dining room, the chandelier should not be too low, otherwise it will hinder people’s sight. We can adjust the height of the chandelier through the suspender to the height suitable for the space.
2. Pay attention to the firmness and safety of the chassis.
When installing the chandelier, you also need to pay attention to its firmness, and install it according to its instructions for use. If the weight of the lamp is more than 3 kg, it is best to use pre-embedded hooks or fix the hanger with expansion bolts on the roof for installation.
3. Check that the boom is firmly connected
Usually, the boom of the chandelier will have a thread, which can be used to adjust the height. , It is necessary to carefully check whether the fixation of the chassis is firm, and whether the connection of the light box suspended by the sling is firm.
