What is an air conditioner cleaning agent
Air conditioner cleaning and sterilizing agent is a cleaning agent for cleaning air conditioners. It can effectively kill harmful bacteria in the heat sink, and at the same time, only water and oxygen are left, so it can truly achieve perfect disinfection. It overcomes the shortcomings of traditional cleaning agents such as strong irritation, corrosion of aluminum fins, and insignificant cleaning effect. It has unique advantages such as cleaning and sterilization, safety and non-toxicity, and fresh air after cleaning.
Composition and use of air conditioner cleaning agent
With the popularization of air conditioners and the gradual enhancement of people’s health awareness, air conditioner cleaning has attracted more and more attention. Through the systematic research on the raw materials such as surfactants, solvents, bactericidal and acaricides, and anti-corrosion agents in the formulation of air conditioner cleaning agents, it was found that 1.0% AEO-9 [(fatty alcohol polyoxyethylene (9) ether] and 0 .5% AMP (fatty alcohol polyoxyethylene ether phosphate) surfactant combination and 4% CS-1 solvent, the product has excellent decontamination ability; adding 0.4% R 301 and 0.05 % Kaison CG has a good killing effect on mites, Staphylococcus aureus, Escherichia coli, mold, etc. In addition, adding triethanolamine and R 1 can greatly reduce the corrosiveness of the product, making the product non-corrosive
How to use the air conditioner cleaner
1. Disconnect the power supply of the air conditioner and open the cover (the way of opening the wall-mounted unit and the cabinet unit is different);
2. Remove the filter, Expose the aluminum fins;
3. Screw the nozzle to “SPRAY”, and spray evenly on the air-conditioning fins to cover the entire aluminum fins;
4. Wait for a minute and turn it on Air conditioning and refrigeration;
5. It is observed that black sewage flows out of the drain;
6. Cover the cover plate and the cleaning work is completed.
Precautions
1. Such as If you are not familiar with dismantling the cover, it is recommended to ask professional assistance;
2. If the air conditioner cleaning agent gets on sensitive parts such as eyes and nose, rinse it with water.
Correct cleaning method of air conditioner filter cleaning
Open the window and ventilate, first wipe the air conditioner shell with a rag, then open the shell, remove the filter, use the water pipe to rinse with tap water, do not use detergent or something, just rinse it directly, if When the water flow is not fast enough to wash down the dirt, you can adjust the shower head in the bathroom to the fastest water flow level, and then rinse it, usually it can be rinsed clean; after rinsing, put it in a cool place to air dry, do not expose it to the sun, filter The net is usually plastic and can’t stand high temperature. Finally, after the filter is dry, put it back into the air conditioner, and close the air conditioner shell.
Note: Do not use brushes and other things when cleaning. That will make the filter eyes of the filter large, which is a damage to the filter, and also affects the use effect of the air conditioner.
Cooling fin cleaning
Cleaning part
Heat exchanger surface: refers to the dirt on the inner and outer surfaces of the fins of all heat exchangers related to the evaporator and condenser of the coil fin air conditioning equipment in this standard that affect the heat exchange efficiency of the equipment.
Air supply mechanism: refers to the air inlet components, filter components, air supply components, air ducts and hoses assembled in the coil fin type air conditioning equipment in this standard, except for the two heat exchangers, the evaporator and the condenser. , air outlet components, condensate trays, body casings and other related air supply mechanisms that affect the air conditioning quality of the equipment are all related to the internal and external surface dirt (except for the installation of extended air ducts).
Cleaning tools
1. Air conditioner cleaning agent, plastic case cleaning agent;
2. (cleaning air conditioner fan), cleaning brush (cleaning air conditioner aluminum fins) pieces);
3. scouring pads (2-3 pieces), screwdrivers and other tools.
Cleaning steps
1. First, remove the air deflector and filter; remove the middle frame screws to remove the shell, and remove the remote control signal receiving board; Remove the temperature sensor and remove the air guide vanes.
2. Put on the air-conditioning waterproof cover, spray the air-conditioning cleaning agent to clean the aluminum fins;
3. Spray the plastic case cleaning agent to clean the wind wheel, and brush the air-conditioning wind wheel;
>
4. Scrub the aluminum fins of the air conditioner, rinse the air conditioner fan, and clean the air conditioner drain.
Second cleaning
A second major cleaning is carried out at the beginning of summer and winter every year to achieve the purpose of sterilization, disinfection and purification. Clean the air conditioner, remove the growth of microorganisms, and eliminate the root cause of bacteria, so that the conditioned air sent by the fan meets the air hygiene standards.
Disinfection method
Disinfectant for air conditioner (for wall-mounted machine)
1. Turn off the power of the air conditioner, unplug the plug, and open the window to keep indoor air circulation;
2. Open the surface panel of the air conditioner, remove the filter screen and air purification filter (some air conditioners have it, see the air conditioner manual), and expose the heat sink;
3. Pull off the top insurance of the nozzle 4. After spraying, wait for about 15 minutes, and use high-temperature water vapor to clean the entire heat sink. Press the flush inward to flush the dirt attached to the fins into the waterway. After the filter is installed, run the air conditioning refrigeration program for 15-30 minutes, and the sewage will be automatically discharged with the drain pipe.
Air Conditioner Disinfectant (Special for Cabinet)
1. Grid Air Conditioner: Turn off the power of the air conditioner, unplug the plug, and pass the air outlet of the air conditioner Baffle or open the panel at the lower air inlet to see the heat sink.
Sliding air conditioner: Turn on the air conditioner, slide down the air conditioner, and then unplug the plug to turn off the power. You can see the heat sink through the air conditioner outlet baffle.
2. Insert the spray pipe at the nozzle, pull off the top safety piece of the spray head, shake the bottle well, and spray about 5cm through the air outlet to the heat sink.
3. Wait for 15 minutes after spray washing, and then run the air-conditioning refrigeration program normally for 15-30 minutes, and the sewage will be automatically discharged with the drain pipe.
Note: Please insert the tube tightly when using, so as not to drop when spraying.
