How to clean the electric fan
1. How to disassemble and clean the electric fan
1. Cut off the power and put the fan Remove the protective net. There are cards around the protective net. After loosening the card, unscrew the screws to take off the protective net.
2. Next, remove the fan blade, unscrew the round plastic cover in the middle of the front of the fan blade, and then you will see a small section of the shaft exposed, hold the leaf and tap the shaft lightly with a small hammer The fan blade is removed. Different models of electric fans have slightly different designs, and some need to remove the small screws on the side of the fan blades.
3. Then you can start washing. Use detergent, washing powder, dishwashing detergent and other cleaning agents mixed with water, soak the protective net in the washing liquid for 10 minutes, then brush it clean, dry it with a dry rag, and let it dry.
4. Fan leaves are generally made of plastic, so do not use hairy oils to wipe them. Use a sponge dipped in lotion to carefully wipe off the dust and dirt, and then wipe it off with a wrung cloth to dry in the shade.
5. When removing the fan, generally do not touch the timer, let alone remove the timer. Because the timers used for electric fans are assembled with special equipment or tools when they are produced by the manufacturer, it is generally unlikely that you have these special tools in your home. Once the timer is disassembled and reassembled, The mainspring and gears inside are difficult to locate and install, so it is generally difficult to restore after dismantling.
Second, cleaning points of electric fans
1. Cleaning fan blades
Use of electric fans After the box is finished, dust will also fall out during storage, and the dust will accumulate for a period of time and form dirt. Due to the rapid rotation of the fan blades for a long time, it is easy to accumulate dust, so how to clean the fan blades? First, open the grille, remove the fan blade, and wipe it with water with detergent. Remember, do not fold it hard or scrape it with a hard object, so as not to damage the fan blade, and dry it after it is clear.
2. Cleaning the mesh cover
It is difficult to clean the mesh cover, because the mesh cover is dense and has gaps, so it is difficult to clean. great difficulty. However, I will teach you a few tricks. After removing the mesh cover, place it in a container that can hold it completely. Then, pour enough water, drop a few drops of washing spirit, and soak it for half an hour. , and then gently scrub with a brush, but the force should be even, do not use too much force, which will cause the mesh cover to deform or fall off the paint, which will affect the use and appearance.
3. Cleaning of the body
The chassis is the main part of the body to clean, but the external cleaning is relatively simple, take a damp cloth and wash it After cleaning, take a dry cloth and dry it, so that the overall cleaning of the electric fan is completed. In addition, the fan does not spin up many times is the problem here. Drop mechanical oil here, and you’re good to go.
Air conditioner cleaning method
1. The cleaning of the air conditioner should start from the exterior. Users can wipe it with a damp cloth after turning off the power. Next, the user can open the shell of the air conditioner under the guidance of the instruction manual according to the model of his air conditioner.
2. After removing the filter, you can use detergent and rinse with water to clean all the dust on the filter. After washing, you need to wait for a while, dry the filter, and then put it back in the air conditioner to prevent the water from evaporating and breed bacteria.
3. Many people’s air conditioner cleaning process ends at the filter screen, but in fact, only cleaning the filter screen can not completely clean the air conditioner, and it is necessary to open the interior to clean the evaporator and blower. The position of the blower is behind the filter, which can play the function of supplying air. The blower is in the form of multiple cylinders. If you want to clean it, you need to remove it and clean it.
4. The position of the evaporator is farther in. If cleaning, you need to take off the housing of the indoor unit of the air conditioner. This process requires a screwdriver to remove the set screws and access the evaporator without destroying the internal components of the air conditioner. It should be noted that the cleaning of the evaporator is more difficult. It is recommended not to remove it, and at the same time, do not lift it too much, and do not damage the pipes and scales on it. If these parts are damaged, it may cause the leakage of refrigerant, and it may cause blindness after spraying in the eyes. Therefore, if you are not proficient in this, I suggest that you still find a professional to clean up this part.
Water dispenser cleaning method
1. Cleaning frequency
The traditional water dispenser liner exceeds 3 If it is not cleaned for a month, a large number of bacteria, residues and even red worms will grow on the inner wall of the heat tank and become toxic “additives”.
It is recommended that the water dispenser be thoroughly cleaned at least once every 2 months. In summer, the temperature is high, and bacteria are easy to breed, so cleaning should be done every month.
Second, cleaning steps
1. Unplug the power plug, remove the bucket, and open the drain pipe behind the water dispenser (usually white plastic material). knob), drain the remaining water. Then, turn on the hot and cold water switch to drain the water.
2. Remove the “smart seat” (that is, the part of the water dispenser that contacts the mineral water bucket), and carefully scrub the inner and outer sides of the water dispenser’s inner tank and lid with alcohol cotton to prepare for the next step of disinfection.
3. Follow the instructions of the decontamination tablet or disinfectant to prepare disinfectant water (salt water can be used for household cleaning water dispensers), introduce it into the water dispenser, fill the entire cavity with disinfectant water, and leave it for 10 to 15 minutes.
4. Turn on all switches of the water dispenser, including the drain pipe and drinking water switch, and drain the disinfectant.
5. Rinse the entire cavity of the water dispenser continuously with clean water (it is recommended to move the water dispenser to the bathroom during this process to ensure sufficient water), and turn on all switches to drain the flushing liquid.
6. Put a glass of water and smell the chlorine smell. If so, add water until you can’t smell any smell before you can drink water with confidence.
Refrigerator Cleaning Methods
1. Empty the refrigerator is the first step
Before cleaning the refrigerator , cut off the power first, and take out all the food in the refrigerator. Then take out the shelves, fruit and vegetable boxes, etc. in the refrigerator, wash them with detergent, and set them aside to dry.
2. Defrost the freezer naturally
Do not use sharp objects to remove the ice cubes in the freezer, and do not use a hot towel to compress, which will easily lead to Refrigerator malfunction.
3. Wipe the inside and outside separately
After cleaning the inside of the refrigerator, open the door, let it air dry, and then wipe the outside of the refrigerator. Where there are oil stains or dirt, you can use a toothbrush dipped in dishwashing liquid to brush lightly, and then dry it with a soft cloth.
4. Don’t let go of cleaning the dead corners
Finally, the ventilation grille on the back of the refrigerator, which is also cleaned with a soft brush, and then dried with a dry soft cloth . It should be noted that the sealing strip on the refrigerator door is to clean the dead corner, and there are more than 20 kinds of microorganisms on it. It is best to wipe it with a soft cloth soaked in alcohol.
5. Activated carbon bag to remove odors
Activated carbon has the effect of adsorbing harmful substances and can also remove odors in the refrigerator, especially leftovers smell. A small charcoal bag is placed in a general two-door refrigerator, and several more can be placed in a three-door or multi-door refrigerator. The charcoal bag can be replaced frequently according to the number of things stored in the refrigerator.
