Use and maintenance of the vacuum cleaner
In addition to cleaning the floor, the vacuum cleaner can also clean the dust in the carpets, walls, furniture, clothing, crafts and various crevices. Nowadays, the use of vacuum cleaners at home has become more and more common, but some people know little about vacuum cleaners and do not know how to use and maintain them properly. To this end, we invite professionals in the household appliance industry in the urban area to make an introduction.
Use of the vacuum cleaner
Before using the vacuum cleaner, check whether the power supply voltage meets the requirements of the machine and whether the power cord has a grounding device. Different nozzles (such as furniture cover nozzles, crevice nozzles and cleaning brushes) should be selected for the place of use. Furniture cushion cover nozzles are used to clean dust and small debris in sofas, curtains, soft fabrics, etc.; crevice nozzles are used to clean garbage and dirt in corners, corners, etc.; cleaning brushes are used to clean and scrub floors , window frames, bookcases, window gaps, etc.
The vacuum cleaner should not be used for too long, and the continuous use time should not exceed 1 hour each time, so as to prevent the motor from overheating and burning. A vacuum cleaner with a dust indicator should not work on the full indicator point. If it is found that it is close to the full point, it should be stopped immediately to clean the dust.
After using the vacuum cleaner, the dust and dirt in the vacuum cleaner should be poured out in time. Otherwise, it is easy to block the air duct next time, resulting in reduced suction, and even cause the motor temperature to rise too high and burn out.
Maintenance of the vacuum cleaner
Check the power cord, dust bag and grounding device frequently. If the power cord is damaged, cracked, or leaky in the dust filter bag, it should be replaced in time. Always check the tightness of each connection of the vacuum cleaner to avoid air leakage and reduce suction. Before using the vacuum cleaner that has been put aside for a long time, the insulation performance of the motor must be checked.
