[Washing machine does not enter water] What should I do if the washing machine does not enter the water because the automatic washing machine does not enter the water
The principle of the automatic washing machine entering the water
When working, the fully automatic washing machine mainly controls the water intake, drainage and the on-off of the motor through the cooperation of the water level switch and the solenoid valve, and finally realizes automatic control. In the fully automatic washing machine, its electromagnetic water inlet valve plays a major role in turning on and off the water source. When the electromagnetic coil is powered off, its moving iron core will be tightly pushed by the force of gravity and spring. On the rubber diaphragm, the central hole of the diaphragm is blocked at the same time, and the water flow of the valve is blocked when the valve is closed. The flow capacity of the small hole in the center of the diaphragm is greater than the flow capacity of the small holes on both sides of the diaphragm, so the pressure above the diaphragm decreases rapidly, and at the same time, its closed door will be opened under the action of the pressure difference, and the water flow will be guided. Pass.
Cause Analysis
To solve the problem of automatic washing machines, the first thing we need to know is the cause of automatic washing machines. What are the reasons. There are three reasons for the automatic washing machine, they are:
1. The filter screen of the water inlet valve of the automatic washing machine is blocked;
2. The inlet valve on the control panel of the washing machine The water relay is damaged;
3. The water inlet solenoid valve is faulty or the contact between the internal plug-in wires is poor;
Solution
What should I do when I encounter the causes of the fully automatic washing machine mentioned above? If the water inlet valve filter is blocked, it is only necessary to clean the filter during maintenance to solve the problem, but if the water inlet solenoid valve and relay of the washing machine are faulty, they can only be replaced. , so that the washing machine can be used normally.
In addition to the above-mentioned reasons for the fully automatic washing machine, if we encounter the automatic washing machine suddenly not entering water, after observation, it is found that the washing machine has not reached the setting during the process of entering the water. If the water level of the washing machine stops suddenly, and the number of secondary occurrences is relatively large, then it may be that the water level switch of the fully automatic washing machine is faulty. At this time, you can choose to buy a new water level switch or ask a special Maintenance personnel come to repair. What to do if the washing machine doesn’t drain>>
