What is the function of the folding tent
1. Provide a display prop for product promotion.
2. Create a promotional environment for product promotion.
3. Add a publicity window for product promotion.
Advertising tent size What are
Advertising tents are 2mX2m, 2.5mX2.5m, 2mX3m, 3mX3m, 3mX4.5m, and 3mX6m lights. Among them, 3mX3m is the most suitable for customers because of its moderate size, while 3mX4.5m and 3mX6m are used more in automobiles. If you need particular specifications, you can also choose to customize.
The advertising tent has a beautiful and generous appearance, the frame body is made of high-quality steel pipe, and the surface is treated with high-temperature baking paint to resist corrosion. It is easy to pull up and can be installed in a few minutes. The portable mobile tent is suitable for outdoor exhibitions, exhibitions, celebrations, open-air banquets, tourism, and leisure. Surface coating, waterproof coating, waterproof and anti-aging treatment, harder than ordinary steel, more durable, anti-corrosion and other characteristics, easy to install, carry, light and durable, casual and freehand, can be put into the back box of jeeps and campers.
How to use the foldable tent
1. How to open the foldable tent
(1) Put the tent, Take out the top cloth and brackets, etc. and get ready.
(2) Open the tent frame halfway.
(3) Put the tent cloth on the top of the middle of the shelf, align the four corners of the tent with the four corners of the shelf, and stick it to the Velcro.
(4) Open the shelf to about 95 percent.
(5) Fasten the four spring buckles on the tent’s corners into the square tube eyes that can move up and down. The same steps are used to complete the four corners.
(6) Pull out the inner tube with the site to a certain height, then it will be automatically buckled, plus a canopy
to complete the installation.
2. How to fold the tent
(1) Place the palm on any diagonal line in the middle. The tent is restored to the way it was before it was opened.
(2) Unfasten the four snap hooks at the tent’s corners.
(3) Fold the four corners of the tent inwards, and then put them in the bag.
Precautions for the use of advertising tents
1. When loading and unloading advertising tents, handle them carefully and do not throw them away.
2. Be careful when opening the package, do not scratch with a knife blindly; it is easy to scratch the tarpaulin.
3. When stacking, it should be placed upright, do not stack to prevent the top of the cloth from being accidentally crushed and torn.
4. Before using the advertising tent, you should check whether the screws at the cross tube are tightened.
5. When any bracket of the advertising tent is found to be bent or deformed, stop using it immediately, carry out maintenance, and continue to operate after troubleshooting.
6. When the advertising tent is used for outdoor display operation, special attention should be paid to wind protection. When the watchman leaves temporarily, the foot of the advertising tent should be lowered to the first section; that is, the inner foot should be indented outside. Inside the foot, thus effectively preventing wind damage.
7. When several tents are operated in parallel, the adjacent tent legs between the advertising tent and the advertising tent should be tied with cable ties or ropes to make them a whole to strengthen their wind resistance.
8. Do not wrap the two tent legs with tape. Otherwise, the tape residue will seriously affect the up and down sliding of the sleeve on the advertising tent legs.
Declare: The above methods are derived from the program system index or shared by netizens. They are for your reference only and do not represent the research views of this website.