1. What is the paper specification of the dot matrix printer?
When the dot matrix printer is printing, it is necessary to select the appropriate paper size according to the printing requirements, and print it on the computer or printer. After setting it up, it can print normally, so how to choose the paper size of the dot matrix printer?
The general specification of the paper printed by the dot matrix printer mainly depends on how many pages and how many equal parts. Commonly used multi-page paper includes 2-page, 3-page, 4-page, and 6-page printer paper. Yes; as for the number of equal parts, it mainly depends on the size to be printed. Generally, the first equal part is a whole sheet of 28cm, and the width is fixed at 21.4cm; the height of the second part is 13.9cm, and the height of the third part is 9.3cm.
Second, how to set the size of the pinhole printer paper
The pinhole printer is often referred to as a needle-type printer, and it is usually necessary to set it when using it The size of the paper is generally set on the computer. The specific setting method is as follows:
1. Click Start, find [Devices and Printers] and click to enter.
2. Select a printer, and then click [Printer Server Properties] under the toolbar.
3. In the pop-up interface, first check [Create a new form]—-enter the form name——then enter the paper size, width and height you want to set below- ——-[Save form]——[Close].
4. So far, the custom printing paper size has been set, and now it needs to be applied to the printer. Double-click a printer in the same interface, and click [Print]—[Properties] in the dialog box to view the content being printed.
5. Click [Device Settings] in the printer properties to manually feed paper to select the paper size you set.
6. In the printer properties, click [General]—[Preferences]—-[Layout]—-[Advanced], select the paper you just set in the paper output/input size.
7. In practical applications, if you want to print a piece of paper of the size you just set, you can directly select it in the software.
Three, continuous printing setting skills of dot matrix printer
How to adjust the setting skills when the dot matrix printer prints 241×140mm continuous paper:
1. Most of this problem is focused on paper settings. Because the default paper in the application software and driver is generally A4 (210×297MM), and continuous paper means that there are guide holes for continuous printing on both sides of the paper, the printing paper is generally multi-layer printing paper. If the continuous paper is 241MM×140MM, it is more than half shorter than A4 paper. So there will be more white paper.
2. How to adjust the settings when the dot matrix printer prints 241×140mm continuous paper:
(1) Define the paper size. First, log in to the system as an administrator, enter the printer folder in the control panel, and select the server properties under the file.
(2) In the server properties, choose to create a new format, and then enter the paper size: width 24.1CM, height 14.0CM. Enter a file name such as “Custom 241X140” in the format description, then select Save.
(3) Create a new document and select a custom size of 241X140 in the page settings. Then enter the width and height of the paper “24.1cm x 14.0cm” (this size must be the same as the new format created).
(4) Enter the content to be printed in the document, and select “File” – “Print” – “Printer Properties”.
(5) Select “Advanced”, and select “Custom 241X140” for paper specification (ie, create a new format file name). This will output normally.
Reminder: Continuous paper printing paper can be divided into two specifications: 241mm and 381mm according to the width. The commonly used specifications are: 241mm×279mm.
