What to do if the computer can’t boot into the system when it starts up
The win7 system can’t boot into the system
1) Keep pressing “F8” after power on
2) Select to enter the “System Advanced Options Menu”
3) Select “Last Known Good Configuration”
4) Waiting to enter the system,
5) Delete the file spoon.sys under the path C: Windowssystem32drivers
6) If you select “Last time correct “Configure”, if you can’t enter the system,
We reboot and then keep pressing “F8” to select “Safe Mode with Command Line Prompt”
7) Type the command del C:windowssystem32Driversspoon .sys
Other reasons why the computer cannot boot into the system
1. The graphics card, sound card or USB expansion card on the PCI expansion card is old If it is damaged or not in good contact, it will cause the self-test to fail and thus lead to the inability to enter the system. You only need to unplug it and replace it with a new one or clean it up.
2. A USB flash drive or other external device is plugged into the host. If the USB flash drive itself has a problem, it will cause the POST to fail. Just unplug it.
3. Keyboard problems. There are some keyboards that are not very good quality. When we press a key, it doesn’t bounce back, but we don’t know. When we turn on the next time, we will not be able to enter the system. Just check whether there are any keys on the keyboard. Restore, if there is any, restore it.
4. The hard disk data cable or power cable is old or bad or in poor contact. If the hard disk cannot be detected after booting, the hard disk will not be able to enter the system. Just replace it with a new one.
5. The CPU will not fail under normal circumstances, but it cannot be ruled out, so check it too.
6. If it still doesn’t work, it should be a system problem, just reinstall the system.
